Coated abrasives
-
PU416 OXAJAUNE (sheets – abrasive paper)
Coated abrasives
Read morePU416 OXAJAUNE is a very effective and tear-resistant coated abrasive, long-lasting with sustainable abrasion capacity. It is ideal for use on an orbital sander. Available here in a 230 x 280 mm sheet, it is also available in rolls and trimmings.
PRIMEX_Technical Sheet_PU416_OXAJAUNE
-
LR560 OXAFLEX (sheets – abrasive paper)
Coated abrasives
Select optionsLR560 is a very flexible abrasive that gets into hard to reach places. One of its main characteristics is to combine flexibility, resistance, longevity and a scratch-free finish. It is the most versatile for manual sanding. Presented here in the form of sheets 230 x 280 mm.
-
Meilleures ventes
PU414 OXALIGHT (sheets – abrasive paper)
Coated abrasives
Select optionsPU414 OXALIGHT is a flexible, cutting and low clogging coated abrasive. One of its main characteristics is to present a limited heating during sanding. It is recommended for soft materials. Presented here in the form of 230 x 280 mm sheets, it is also available in rolls.
-
TR512 TOILE VERDUN (Sheets & cut-sheets – abrasive cloth)
Coated abrasives
Select optionsParticularly flexible, the TG502 TOILE VERDUN abrasive cloth is recommended for carpentry and mechanical repair work. It is for dry use only. The TG502 TOILE VERDUN is available in 230 x 280 mm sheets and 460 x 1,000 mm cuts, as well as in rolls.
-
LW520 FLEXIBACK (sheets – abrasive paper)
Coated abrasives
Select optionsFlexible and fine, the LW520 FLEXIBACK is an abrasive paper guaranteeing an impeccable surface condition. It is recommended for sanding hard metals under water with the coarsest grains and for finishing work with fine grains.
-
LW620 FLEXIBACK SI (sheets – abrasive paper)
Coated abrasives
Select optionsFlexible and resistant, with a durable abrasion capacity, the LW620 FLEXIBACK SI guarantees a streak-free finish. To be used in particular on soft materials, it is particularly recommended for the wet sanding of paints and varnishes.
-
PR777 REDOXAL (rolls – abrasive paper)
Coated abrasives
Read moreBecause it resists high mechanical and thermal stresses, PR777 REDOXAL is recommended for machine or manual sanding hard materials< /strong>. With its hardened brown corundum grain in a semi-open arrangement, it is a very effective sanding paper for work involving large material removal.
PR777 REDOXAL is available in rolls and 125 or 150 mm diameter discs with several proposed perforations.
-
LR590 AUTOCLEAN (cut-sheets – abrasive paper)
Coated abrasives
Select optionsLR590 AUTOCLEAN is a sandpaper with long-lasting abrasion capabilities. Anti-clogging and ultra-resistant, it is excellent, in coarse grain, for removal work on soft material such as wood, primer, paint, varnish, etc. Taken in fine grain, it guarantees a high level of finish.
In addition to trimmings for the hand hold, the LR590 AUTOCLEAN is cut in trims for portable power sander, in discs and in rollers.
-
SELF-GRIP TUNGSTENE DISC
Coated abrasives
Select optionsVery hard and long lasting. Very resistant to wear and overheating. Cleans very easily with a nylon brush. Particularly suitable for heavy sanding work on stone, concrete, tiles and plaster.
-
TR570 OXATEX (belt – abrasive cloth)
Coated abrasives
Read moreResistant and versatile, the abrasive cloth TR570 OXATEX acts by limiting the heating of the sanded material. It is recommended for dry polishing of metals, wood and plastic.
The components of the TR570 OXATEX abrasive cloth are :
- backing: heavy cotton canvas,
- grain: aluminum oxide ,
- binder: resin.
-
TR949 ZIRCO (belt – abrasive cloth)
Coated abrasives
Select optionsComposed of a heavy polyester cloth support, a zirconium grain and a resin binder, the TR949 ZIRCO abrasive cloth is ultra tear resistant with long lasting abrasion capabilities. It is particularly effective for dry sanding and polishing of hard materials such as stainless steel or cast iron. It is also recommended for leather.
TR949 ZIRCO fabric is available in 200 x 750 mm strips.
-
Deburring ALOX (quick change discs)
Coated abrasives
Read moreQuick change disc suitable for general use on metal or other material. Ensures a good finish.
-
Deburring ZIRCO (quick change disc)
Coated abrasives
Select optionsThe QCD “ZIRCO Deburring” is a very hard and versatile quick change disc. It is ideal for large stock removals.